职位描述
Factorial Energy is a pioneering U.S.-based solid-state battery company driving the future of energy storage and electrification. Partnered with global leaders including Mercedes-Benz, Stellantis, Hyundai, and Kia, Factorial is at the forefront of developing next-generation e-mobility platforms for commercial, defense, and consumer applications-spanning electric vehicles (EVs), drones, eVTOL aircraft, power tools, marine systems, robotics, and more. The company has achieved multiple industry firsts, including being the first to power a demonstration vehicle with a global OEM (Mercedes- Benz) which achieved over 1,200 km (749 mi) of range, and the first to earn UN 38.3 certification for automotive-sized lithium-metal solid-state cells, the first to deliver B-samples of automotive-sized solid-state batteries to major OEMs.
The Opportunity
Factorial Energy is seeking a Senior / Staff Cell Finishing Equipment Engineer to join our Cheonan, South Korea site. The ideal candidate owns the full-cycle development, commissioning, customization, optimization, and mass production scaling of automatic final sealing, edge folding, OCV testing, and X-ray inspection equipment for our Silicon Power Cell pouch cell line. This person will lead new post-process equipment R&D, prototype debugging, pilot verification, and mass production iteration; deliver equipment technical upgrades, OEE & yield improvements; and build a standardized equipment management system.
In this role, you will
- Lead full-lifecycle development, commissioning and mass-production validation of automatic final sealing, folding, OCV and X-ray inspection equipment, iterate core process parameters and complete equipment adaptation for new product launch.
- Conduct equipment review, FAT/SAT acceptance and IQ/OQ/PQ qualification, and unify precision and quality control standards for post-process assembly and inspection procedures.
- Upgrade and retrofit mass-production final sealing, folding and inspection equipment to improve OEE, production yield and line capacity, and reduce manufacturing costs.
- Optimize sealing fixtures, folding structures, testing probes and machine vision parameters to stabilize production, eliminate poor sealing, folding offset, OCV testing deviation and X-ray detection errors, and support rapid multi-spec pouch cell changeover.
- Build complete standardized equipment management systems for post-process stations, including SOPs, maintenance schedules, calibration specifications, PFMEA, control plans, and equipment failure databases.
- Collaborate with cross-functional teams (R&D, Process, Quality, Manufacturing, Maintenance) and external vendors to advance new line startup, equipment development and technical renovation projects.
- Optimize post-process temperature & pressure closed-loop logic, servo positioning, electrical signal acquisition, and X-ray imaging algorithm to adapt silicon anode cell characteristics and eliminate assembly & inspection defects.
- Lead equipment technical transfer from lab/pilot EVT/DVT/PVT to mass production, identify equipment bottlenecks and drive sustained yield improvement.
- Adopt 8D, DOE, SPC, and root-cause analysis to resolve typical post-process abnormalities, drive cross-functional troubleshooting, and close CAPA for recurrent equipment failures.
We are looking for people who
- Bachelor's degree or above in mechanical, mechatronics, electrical automation, materials, chemical engineering, or related fields.
- 3+ years of experience in pouch cell final sealing, folding, OCV & X-ray equipment development, retrofit and production ramp-up.
- 2+ years of professional experience in post-process equipment structure and control logic; skilled in sealing temperature/pressure tuning, folding precision control, electrical testing calibration, and X-ray inspection parameter optimization.
- Capable of mechanical/electrical drawing reading and CAD/SolidWorks fixture design; familiar with servo motion, constant temperature-pressure control, precision testing and machine vision inspection systems.
- Proficient in DOE, PFMEA, Control Plan, 8D and root cause analysis; independent in equipment troubleshooting and technical optimization.
- Experienced in pouch cell post-process line NPI and mass production ramp-up projects.
- Equipped with cross-functional coordination, project management, and overseas vendor communication abilities; competent in on-site troubleshooting and English technical documentation.
- Proficient in English for technical document reading, global technical meetings, and technical report delivery.
Work Location
Cheonan, South Korea
Factorial Energy is an equal opportunity employer that values diversity at all levels. All qualified applicants, regardless of personal characteristics, are encouraged to apply.
职位详情
关于 Factorial Energy
公司概况
业务范围
Factorial Energy 基于 FEST 和 Solstice 两个自有平台开发固态电池,面向航空航天、储能和出行应用。FEST 是 Factorial Electrolyte System Technology 的缩写,其电芯可兼容多达 80% 的现有锂离子电池生产设备。Solstice 是一个基于硫化物的全固态电池平台,采用自有的干法正极工艺。
Factorial 采用轻资产商业化模式,以联合制造合作为基础。在 Solstice 平台上,公司仍是不自建工厂的创新者,主导电芯设计、工艺开发、供应链认证、产线集成和制造验证。其商业合作伙伴包括梅赛德斯-奔驰、Stellantis、现代汽车公司和起亚公司。
项目与业绩
首席执行官 Siyu Huang 与联合创始人 Alex Yu 和 Héctor D. Abruña 共同推出了公司。2021年4月,Factorial 在约六七年的研发之后结束隐身状态,发布了一款 40 Ah 固态电芯。2021年10月底,公司宣布与现代汽车合作,在现代电动汽车上测试其电池。
公司与 Stellantis 的合作始于2021年;此后,该技术被集成到一辆完整制造的 Dodge Charger Daytona 示范车中。2025年,梅赛德斯-奔驰将 Factorial 的 FEST 电芯装入一辆经轻度改装的 EQS 测试车,该车单次充电从斯图加特行驶 1,205 公里抵达马尔默。
近期动态
2026年2月,Factorial 与 Karma Automotive 宣布启动美国首个乘用车固态电池生产项目,首款车型为纯电动超级跑车 Karma Kaveya,计划于2027年底登上美国道路。2026年3月,Factorial 获得 IQT、Philenergy 和 POSCO Future M 的战略投资,用于拓展无人机和移动机器人领域。
2026年6月,Factorial 完成与特殊目的收购公司 Cartesian Growth Corporation III 的业务合并,并以代码 FAC 在纳斯达克上市。该交易对应的股权价值约为13亿美元,募得总收益超过1亿美元。
2026年7月,Factorial 与荷兰无人机电池系统开发商 Tulip Tech Group 建立战略合作,此前客户的首轮飞行测试显示航程提升超过30%。同月,公司宣布获得航空航天领域首个商业订单,将供应锂金属电芯,由一家美国集成商装入无人机电池包。
同样在2026年7月,Factorial 与 SK On 签署谅解备忘录,评估 SK On 的制造网络和现有锂离子电池基础设施能否支持固态电池的开发。2026年9月,公司宣布与硫化物固态电解质领先生产商 Mitsui Kinzoku 建立合作伙伴关系,以推动 Solstice 的产业化。
工作环境
Factorial 目前的空缺职位位于韩国天安,包括组装、化成、电芯后处理、焊接与密封设备以及 MES 系统方面的技术员和工程师,以及电池生产管理与督导、库存、会计、质量和电芯测试等岗位。当地的电池生产经理需与工艺工程、质量、维护、供应链、计划和 EHS 团队协作。