Rejobs

DFMA机械工程师

加入Alternative Heat,在英国纽里担任DFMA机械工程师。你将为模块化设备间、机电撬块和管道系统制作SolidWorks模型、制造图纸、装配文件及物料清单,运用DFMA原则提升可制造性和成本效率,并支持BIM协调。这是一份长期全职现场岗位,你可负责自己的工程任务,并参与改进设计流程。

薪资
未注明
地点
纽里,英国
工作地点
现场
工作类型
全职
在 alternativeheat.pinpointhq.com 申请

检查您的收件箱。

用手机?稍后可以在电脑上申请。

Role Overview

The role is responsible for delivering engineering outputs within the DFMA Engineering function, developing plantrooms, MEP skids and pipework systems that are manufacturable, modular and ready for assembly. The successful candidate will take ownership of models, drawings and Bills of Materials (BOMs) with minimal supervision, applying DFMA principles to improve buildability, efficiency and cost-effectiveness. They will also support the Lead Mechanical Engineer - DFMA with technical delivery, coordination and the maintenance of engineering standards.

Department

Design

Employment Type

Permanent - Full Time

Location

Alternative Heat Head Office

Workplace type

Onsite

Reporting To

Head of Engineering DFMA

What You'll be Doing

Engineering Delivery

  • Produce and manage SolidWorks models, fabrication drawings and assembly packs, pipe spool drawings, and BOMs for assigned work packages

  • Develop skid layouts, plantroom configurations, pipework arrangements, spool strategies, and modular breakdowns

  • Produce technical submittal content and maintain revisions through 4P

  • Check and correct own outputs before issue; minimise rework into manufacturing and site

Technical Application

  • Apply DFMA principles in all design and modelling activities

  • Develop parametric and reusable SolidWorks models to support efficient and consistent design

  • Carry out fabrication detailing, assembly definition, and engineering checks/calculations as required

  • Support engineering validation, including FEA where required (under guidance where needed), verification of supports, frames, and lifting arrangements

BIM Interoperability & Digital Workflow

  • Support integration of SolidWorks outputs with BIM platforms (Revit/Navisworks/IFC)

  • Produce coordination-ready exports and ensure outputs are usable in the coordination environment

  • Identify and propose improvements to data exchange workflows, export consistency, and interoperability

Fabrication Definition & Efficiency

  • Deliver fabrication-ready information for manufacture: drawings, assembly packs, BOMs

  • Design with manufacturability, access, lifting, transport, and build sequencing in mind

  • Apply a cost and material efficiency mindset: reduce waste, standardise components/lengths, and simplify fabrication

  • Use appropriate SolidWorks features such as weldments, routing, piping, and cut lists This hard copy is uncontrolled. Printed for reference only.

PDM & Data Control

  • Use SolidWorks PDM in line with defined workflows and standards

  • Ensure correct structure, version control, and release discipline (no uncontrolled files)

Quality, Standards & Improvement

  • Comply with project requirements, client specifications, and internal DFMA standards

  • Resolve day-to-day engineering and assembly issues; escalate complex issues with options and impacts

  • Contribute to templates, standard libraries, and continuous improvement of modelling and fabrication workflows

What You Need to Have

  • Strong working capability in SolidWorks (modelling, assemblies, fabrication drawings, BOMs)

  • Solid understanding of DFMA principles, fabrication methods, and modular assembly

  • Working knowledge of SolidWorks PDM and revision/release control.

  • Understanding of BIM coordination principles and SolidWorks ↔ BIM interoperability

  • Ability to produce accurate, buildable engineering outputs independently and solve practical problems

  • Strong attention to detail, and clear communication across Design/BIM/Manufacturing/Site

同类岗位的典型薪资

估算
£40,000–62,600 每年
中级 · 英国 · 489 个同类岗位

过去 24 个月内 Rejobs 上该群组广告薪资的中间一半。该雇主未标明薪资。

职位详情

发布时间
17 11月 2026
时区
UTC+00:00
经验
SolidWorks and DFMA capability required; years of experience not specified.

关于 Alternative Heat

公司概况

Alternative Heat Limited,私营公司,最终母公司为MCMU Holdings Limited

Banbridge,北爱尔兰,英国

2005

平均约400名员工,截至2026年3月的财年营业额为6,230万英镑

业务范围

Alternative Heat设计并建造场外预制的机电与给排水(MEP)解决方案,全部由公司自行设计和制造,服务于英国、爱尔兰和欧洲大陆市场。其主要领域涵盖数据中心、大型区域供热项目、高层住宅和医疗建筑。

在可再生热能领域,公司提供生物质和热泵技术的交钥匙预制系统。公司是HERZ生物质产品系列在英国和爱尔兰的独家合作伙伴和经销商,与Rhoss签有商用热泵直接供货协议,并为其所有可再生能源装置提供维修保养合同。

项目与业绩

Alternative Heat完成了英国皇家植物园邱园Temperate House温室的脱碳改造,该温室是世界上现存最大的维多利亚时代玻璃温室;相邻的Evolution House温室也一并完成改造。公司作为总承包商和总设计方,为兰贝斯区议会实施了覆盖多个场所的空气源和水源热泵项目,并在英国皇家空军博物馆安装了一套1,550千瓦的两级空气源和水源热泵系统。

在生物质领域,公司为法夫议会设计并安装了一座2兆瓦的生物质能源中心,并受NHS Ayrshire and Arran委托,为University Hospital Ayr提供了一座1.5兆瓦的生物质能源中心。2023年,苏格兰高地议会授予公司一份生物质设施运营和维护合同,招标估值为3,500万英镑,在6年内为88个场所提供维修、保养和生物质燃料供应。

近期动态

截至2026年3月的财年,Alternative Heat Limited的营业额增至6,230万英镑,截至2025年3月的上一财年为4,630万英镑。据董事会介绍,公司已赢得多项将在未来几年交付的重要合同,并为此进一步增加了员工人数。

2025年3月,公司获得CHIC框架协议下为期四年的合同(Communities & Housing Investment Consortium),负责低碳技术的供应、安装、更换和维护。2026年6月,其位于Mallusk的Decarb Modular Solutions团队交付了该工厂制造的首座模块化能源中心,该工厂于前一年年底启用。2026年10月,公司完成了三座预制生物质锅炉房的工程,这些锅炉房服务于韦克斯福德的学校,属于Schools Energy Pathfinder Programme 2024项目;公司还荣获2026年劳斯郡商业大奖(Louth Business Awards)创新奖。

在数据中心领域,公司于2025年12月宣布,已为一个大型数据中心项目交付并安装了一座20兆瓦的冷水机房。2026年1月,公司正为一位长期客户在阿姆斯特丹地区的两个数据中心项目提供场外模块化解决方案,规模分别为19.2兆瓦和28.8兆瓦。

工作环境

Alternative Heat在英国、爱尔兰和欧洲其他地区设有办事处和工作场所,提供多种岗位和工作地点。除Banbridge总部外,公司还在贝尔法斯特、Dundalk、都柏林、伦敦、伯明翰、格拉斯哥、因弗内斯、法兰克福和阿姆斯特丹设有办事处。在其位于Scarva、Gilford和Banbridge的制造和装配工厂,工作流程涵盖从管材到货和加工,到焊接、喷砂、涂装、装配直至发货的全过程。

2026年9月,公司推出Student Programme 2026学生计划,在高级学徒和实习学生在公司工作期间为他们提供全程支持。公司的认证包括“生活工资雇主”(Living Wage Employer)资格。

更多 电气化与能效 相似职位

DFMA机械工程师
Alternative Heat