Functieomschrijving
Factorial Energy is a pioneering U.S.-based solid-state battery company driving the future of energy storage and electrification. Partnered with global leaders including Mercedes-Benz, Stellantis, Hyundai, and Kia, Factorial is at the forefront of developing next-generation e-mobility platforms for commercial, defense, and consumer applications-spanning electric vehicles (EVs), drones, eVTOL aircraft, power tools, marine systems, robotics, and more. The company has achieved multiple industry firsts, including being the first to power a demonstration vehicle with a global OEM (Mercedes- Benz) which achieved over 1,200 km (749 mi) of range, and the first to earn UN 38.3 certification for automotive-sized lithium-metal solid-state cells, the first to deliver B-samples of automotive-sized solid-state batteries to major OEMs.
The Opportunity
Factorial Energy is seeking a Senior / Staff Cell Finishing Equipment Engineer to join our Cheonan, South Korea site. The ideal candidate owns the full-cycle development, commissioning, customization, optimization, and mass production scaling of automatic final sealing, edge folding, OCV testing, and X-ray inspection equipment for our Silicon Power Cell pouch cell line. This person will lead new post-process equipment R&D, prototype debugging, pilot verification, and mass production iteration; deliver equipment technical upgrades, OEE & yield improvements; and build a standardized equipment management system.
In this role, you will
- Lead full-lifecycle development, commissioning and mass-production validation of automatic final sealing, folding, OCV and X-ray inspection equipment, iterate core process parameters and complete equipment adaptation for new product launch.
- Conduct equipment review, FAT/SAT acceptance and IQ/OQ/PQ qualification, and unify precision and quality control standards for post-process assembly and inspection procedures.
- Upgrade and retrofit mass-production final sealing, folding and inspection equipment to improve OEE, production yield and line capacity, and reduce manufacturing costs.
- Optimize sealing fixtures, folding structures, testing probes and machine vision parameters to stabilize production, eliminate poor sealing, folding offset, OCV testing deviation and X-ray detection errors, and support rapid multi-spec pouch cell changeover.
- Build complete standardized equipment management systems for post-process stations, including SOPs, maintenance schedules, calibration specifications, PFMEA, control plans, and equipment failure databases.
- Collaborate with cross-functional teams (R&D, Process, Quality, Manufacturing, Maintenance) and external vendors to advance new line startup, equipment development and technical renovation projects.
- Optimize post-process temperature & pressure closed-loop logic, servo positioning, electrical signal acquisition, and X-ray imaging algorithm to adapt silicon anode cell characteristics and eliminate assembly & inspection defects.
- Lead equipment technical transfer from lab/pilot EVT/DVT/PVT to mass production, identify equipment bottlenecks and drive sustained yield improvement.
- Adopt 8D, DOE, SPC, and root-cause analysis to resolve typical post-process abnormalities, drive cross-functional troubleshooting, and close CAPA for recurrent equipment failures.
We are looking for people who
- Bachelor's degree or above in mechanical, mechatronics, electrical automation, materials, chemical engineering, or related fields.
- 3+ years of experience in pouch cell final sealing, folding, OCV & X-ray equipment development, retrofit and production ramp-up.
- 2+ years of professional experience in post-process equipment structure and control logic; skilled in sealing temperature/pressure tuning, folding precision control, electrical testing calibration, and X-ray inspection parameter optimization.
- Capable of mechanical/electrical drawing reading and CAD/SolidWorks fixture design; familiar with servo motion, constant temperature-pressure control, precision testing and machine vision inspection systems.
- Proficient in DOE, PFMEA, Control Plan, 8D and root cause analysis; independent in equipment troubleshooting and technical optimization.
- Experienced in pouch cell post-process line NPI and mass production ramp-up projects.
- Equipped with cross-functional coordination, project management, and overseas vendor communication abilities; competent in on-site troubleshooting and English technical documentation.
- Proficient in English for technical document reading, global technical meetings, and technical report delivery.
Work Location
Cheonan, South Korea
Factorial Energy is an equal opportunity employer that values diversity at all levels. All qualified applicants, regardless of personal characteristics, are encouraged to apply.
Over deze vacature
Over Factorial Energy
Bedrijfsprofiel
Factorial Energy Inc., genoteerd aan de Nasdaq
Wat ze doen
Factorial Energy ontwikkelt vastestofbatterijen op twee eigen platforms, FEST en Solstice, voor toepassingen in de lucht- en ruimtevaart, energieopslag en mobiliteit. FEST staat voor Factorial Electrolyte System Technology, en de cellen werken met tot 80 procent van de bestaande productieapparatuur voor lithium-ionbatterijen. Solstice is een volledig vastestofplatform op basis van sulfiden, met een eigen procedé voor droge kathodes.
Factorial hanteert een kapitaalextensief commercialiseringsmodel dat steunt op gezamenlijke productiepartnerschappen. Bij het Solstice-platform blijft het bedrijf de fabless innovator die celontwerp, procesontwikkeling, kwalificatie van de toeleveringsketen, lijnintegratie en productievalidatie leidt. Tot de commerciële partners behoren Mercedes-Benz, Stellantis, Hyundai Motor Company en Kia Corporation.
Projecten en ervaring
CEO Siyu Huang presenteerde het bedrijf samen met medeoprichters Alex Yu en Héctor D. Abruña. In april 2021 kwam Factorial na zo'n zes à zeven jaar onderzoek en ontwikkeling uit de stealthmodus en onthulde het een vastestofcel van 40 Ah. Eind oktober 2021 kondigde het een samenwerking met Hyundai aan om zijn batterijen in elektrische auto's van Hyundai te testen.
De samenwerking met Stellantis begon in 2021, en sindsdien is de technologie ingebouwd in een volledig gebouwd demonstratievoertuig, een Dodge Charger Daytona. In 2025 bouwde Mercedes-Benz FEST-cellen van Factorial in een licht aangepaste EQS-testauto, die op één lading 1.205 km van Stuttgart naar Malmö reed.
Recente ontwikkelingen
In februari 2026 kondigden Factorial en Karma Automotive het eerste productieprogramma voor vastestofbatterijen in personenauto's in de Verenigde Staten aan. Het begint met de volledig elektrische supercoupé Karma Kaveya, die eind 2027 op de Amerikaanse wegen moet verschijnen. In maart 2026 ontving Factorial strategische investeringen van IQT, Philenergy en POSCO Future M om uit te breiden naar drones en mobiele robotica.
In juni 2026 rondde Factorial de bedrijfscombinatie met Cartesian Growth Corporation III af, een special purpose acquisition company, en kreeg het een notering aan de Nasdaq onder het symbool FAC. De transactie impliceerde een aandelenwaarde van ongeveer 1,3 miljard dollar en leverde meer dan 100 miljoen dollar bruto-opbrengst op.
In juli 2026 sloot Factorial een strategisch partnerschap met Tulip Tech Group, een Nederlandse ontwikkelaar van batterijsystemen voor drones, nadat de eerste vliegtests bij klanten meer dan 30% extra vliegbereik hadden opgeleverd. In dezelfde maand meldde het zijn eerste commerciële order in de luchtvaart: lithium-metaalcellen die een Amerikaanse integrator in batterijpacks voor drones verwerkt.
Eveneens in juli 2026 tekende Factorial een intentieverklaring met SK On om te onderzoeken of het productienetwerk en de bestaande lithium-ioninfrastructuur van SK On de ontwikkeling van vastestofbatterijen kunnen ondersteunen. In september 2026 maakte het een partnerschap met Mitsui Kinzoku bekend, een toonaangevende producent van vaste elektrolyten op basis van sulfiden, om de industrialisatie van Solstice te ondersteunen.
Werken bij het bedrijf
De huidige vacatures van Factorial zijn in Cheonan, Zuid-Korea: technici en engineers voor assemblage-, formatie-, celafwerkings-, las- en sealapparatuur en MES-systemen, plus functies in leiding en toezicht bij de batterijproductie, voorraadbeheer, boekhouding, kwaliteit en celtesten. Een productiemanager batterijen werkt er samen met de teams voor procestechniek, kwaliteit, onderhoud, toeleveringsketen, planning en EHS.