Stillingsbeskrivelse
A Maintenance Technician III is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 6 or more years of maintenance experience in a manufacturing environment or 4 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
- Maintain compliance with all Company policies.
- Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
- Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
- Be an effective team player and work well with all other departments.
- Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
- Make recommendations for preventative/predictive maintenance tasks to improve efficiency, equipment availability, and performance.
- Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
- Repair and replace electrical, hydraulic, pneumatics, and electronic components such as motors, contractors, relays, timers, types of switches, PLCs, light curtains, motor controls, and valves as directed by Team Lead or Supervisor.
- Diagnose faults on electrical equipment or systems, which may involve complex interlocking, interrelated circuits, integrated systems, and complex sequencing.
- Diagnose complex electrical systems, mechanical components, pneumatic components, and controls to identify hazards, defects and need for adjustments, repairs, or programming.
- Examine, install, replace, and repair electronic wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures, and other electrical components.
- Support and perform installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
- Test electrical and electronic equipment and components for continuity, current, voltage, and resistance.
- Run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and Company policy.
- Wire new control panels according to supplied drawings and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
- Make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
- Support the maintenance of spare parts inventory levels.
- Maintain an organized workplace that complies with housekeeping requirements.
- Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
- Must be able to lift loads upwards of 50lbs.
Qualifications
Skills
- Excellent interpersonal, organizational, and communication skills.
- Proficiency in Microsoft Office for daily tasks.
- Strong attention to detail and ability to follow instructions and multi-task as needed.
- Knowledge of equipment set up, functions, operating procedures, and preventative maintenance techniques.
- Ability to operate hand tools and machinery such as a lathe and mill.
- Strong diagnostic, analytical, and problem-solving skills.
- Troubleshooting experience with electrical & mechanical equipment, PLC systems, Robots, AC & DC drives, servo drives, motion control, HMI interface, motor controls, safety sensors, and relays.
- Ability to read wiring diagrams, electrical, mechanical, pneumatic, and hydraulic schematics, and ladder/function block logic.
- Knowledge of Computerized Maintenance Management Systems (CMMS) preferred.
- Knowledge of facility equipment (HVAC, Air Compressor, Air Dryer, etc.) preferred.
- Basic knowledge of single and 3-Phase electrical systems preferred.
Traits
- Ability to work effectively with cross-functional team members.
- Mechanical aptitude/interest.
Education and/or Experience
- 6 years or more of maintenance experience, or 4 years of experience with one of the following:
- 309A - Electrician - Construction & Maintenance
- 433A - Industrial Mechanic
Preferred:
- Deep knowledge of electrical and hydraulic systems.
- Comprehensive command of maintenance procedures and techniques.
- Forklift and/or scissor lift certification or experience.
Physical Requirements
- Must be able to lift and move materials up to 25 pounds independently and participate in team lifts of approximately 60 pounds as required for essential production tasks.
- Must be able to remain in a stationary position or move throughout the production floor for extended periods (for the duration of the shift up to 8+ hours per shift).
- Must be able to operate, position, adjust, or move equipment, tools, or materials necessary for production processes.
- Capable of performing consistent, manual production tasks over long shifts.
- Must be able to work in typical manufacturing environmental conditions, including areas requiring PPE, exposure to noise, and temperature variation.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Additional Information
Compensation and Benefits
- $28-$40/Hour
- Paid Time Off (vacation, sick, and holiday)
- 401(k) Retirement Plan
- Medical/Dental/Vision Insurance Plans
- Health Savings Account option
- Supplemental/Voluntary Insurance Plans
- Employee Assistance Program
- Tuition Reimbursement Program
- Employee Recognition Programs
- Employee PV Panel Purchase Program
Silfab Solar is an Equal Opportunity Employer and is committed to fostering an inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.
Any information provided during the application process will be maintained in accordance with applicable privacy laws and Equal Employment Opportunity (EEO) requirements.
Løn og goder
Om stillingen
Om Silfab Solar
Virksomhedsoversigt
Silfab Solar Inc., støttet af fonde rådgivet af ARC Financial Corp.
Mississauga, Canada
2010
Omkring 800 medarbejdere (2023)
Hvad de laver
Silfab Solar designer, udvikler og fremstiller solcellemoduler og solceller. Panelsortimentet omfatter Silfab Elite, Silfab Prime, Silfab Commercial og Silfab Utility, som sælges gennem distributører og installatører i USA og Canada.
Virksomheden driver en fabrik til solcellemoduler på 1,1 GW i Burlington, Washington. Fabrikken i Fort Mill, South Carolina, skulle i første omgang producere mindst 1 GW solceller og 1,3 GW moduler.
Projekter og erfaring
Silfab Ontario åbnede en fabrik til solcellemoduler i Mississauga i 2011, og produktionen er siden flyttet fra Ontario til Burlington, Washington. I 2025 fik Silfab Commercial-serien status som »Top Performer« hos det uafhængige testinstitut Kiwa PVEL, det syvende år, Silfab har fået den anerkendelse.
Fællesskabssolcelleprojektet LSE Ursa Minor i Concord, New Hampshire, der stod færdigt i november 2026, er bygget med paneler fra Silfab og ventes at producere over 9 GWh om året. I foråret 2026 installerede Ecotech Solar Silfab Prime-moduler på 24 boliger tilhørende Suquamish-stammen i staten Washington, i alt 212 kW solcellekapacitet.
Seneste nyt
I november 2024 lukkede Silfab en ny finansiering på 100 mio. dollar til at opskalere sin solcellefabrik i Fort Mill, herunder en egenkapitalinvestering på 50 mio. dollar ledet af fonde rådgivet af ARC Financial Corp. I maj 2025 annoncerede virksomheden salg af skattekreditter efter Section 45X for op til 110 mio. dollar til avanceret produktion og købte EnPV’s portefølje af teknologipatenter, som tilfører teknologien Self-Aligned Back Contact (SABC) til solceller med bagsidekontakt.
At arbejde der
Blandt de ledige stillinger er job i produktionen, som stringer-operatør og i vedligeholdelsen på Pitman-dag- og nattehold i Burlington, Washington, samt stillinger inden for facility, kvalitet og marketing i Fort Mill, South Carolina. Silfab tilbyder konkurrencedygtig løn, omfattende personalegoder, betaling af uddannelsesudgifter og en medarbejderkøbsordning.
Virksomhedens praktikforløb, der tilbydes på alle Silfabs anlæg, varer 10 til 12 uger, eller 3 til 6 måneder for co-op-studerende, inden for fx produktion af solpaneler, ingeniørarbejde, miljøvidenskab samt salg og marketing.