Driller
Ormat Technologies
Company Overview
Ormat Technologies Inc.
Reno, NV, United States
1965
Approximately 2,000-5,000 employees globally (source: salestools.io). Revenue exceeding $1 billion annually (source: salestools.io).
What They Do
Ormat Technologies focuses primarily on geothermal power generation, utilizing proprietary binary cycle technology through the Ormat Energy Converter (OEC). This innovative system operates on a closed-loop mechanism where geothermal brine heats a secondary fluid with a low boiling point, enabling turbines to generate power without emissions. This technology allows Ormat to harness lower-temperature geothermal resources, ranging from 150°F to 300°F, making it a leader in the geothermal sector with over 3,200MW of geothermal and recovered energy generation (REG) equipment supplied globally since the 1980s. The company holds a commanding market share of over 70% in binary geothermal technology, supported by more than 100 patents (source: ormat.com, wikipedia.org).
Projects & Track Record
Ormat has developed over 190 power plants with a total installed capacity of 3,200MW, showcasing its extensive experience in the geothermal sector. Notable projects include the 36MW Heber Complex in California, the 150MW Olkaria III in Kenya, and the 50MW Leyte Optimization in the Philippines. The company has also made significant strides in the U.S. market, achieving a capacity of 1,300MW by 2010 through a combination of development, construction, and acquisitions. Recent completions include the Rabbit Hill Battery Energy Storage System in Texas, marking Ormat's first project in the state, and the acquisition of the Pomona Energy Storage Facility in California, which represents its first foray into energy storage in that region (source: ormat.com, wikipedia.org).
Recent Developments
In the past two years, Ormat has made significant advancements, including the announcement of a Plain Bearings Turbine innovation on September 11, 2024, which aims to enhance geothermal efficiency. The company also partnered with SLB on June 24, 2024, to deliver integrated geothermal project solutions, further solidifying its position in the market. Additionally, Ormat celebrated key milestones in energy storage on April 18, 2024, including the Wrise Event for Women in Renewable Energy in Nevada and the Cove Fort tour, which highlighted permitting reforms. While no major acquisitions or mergers have been reported since 2021, Ormat is actively targeting to double its energy storage capacity to 600-670MW/1.5-1.7GWh by the end of 2025, supported by U.S. Investment Tax Credit (ITC) incentives (source: ormat.com, investmentreports.co).
Working There
Ormat Technologies offers a diverse range of roles across various departments, including engineering (software, infrastructure, geothermal turbines), product management and design, sales and marketing, operations, finance, HR, and executive positions. The company actively hires at its Reno headquarters, as well as in Sparks, NV, and globally in locations such as Indonesia and Kenya. The company culture emphasizes innovation, collaboration, and continuous learning, with a focus on employee well-being. The Reno headquarters features modern amenities such as open-plan offices, collaboration spaces, high-speed technology infrastructure, fitness and wellness rooms, cafeterias, and lounges, all designed to foster both focused work and teamwork (source: salestools.io).
Last updated on 2026-02-23 | Report an issue
Job Description
This position is responsible for operating the controls of the rig, acting as the rig lead, and reports to Rig Supervisor.
Responsibilities
- Strictly adhere to and enforce all safety procedures.
- Responsible for immediate reporting to Rig Supervisor of all accidents and incidents.
- Responsible for overseeing the mobilization, set up and break down of equipment.
- Responsible for the safe operation of the rig and supporting equipment.
- Act as the rig lead during rig operations.
- Must be able to train and later act as a Rig Supervisor in the Rig Supervisor's absence.
- Responsible for carrying out the directions of the Rig Supervisor and Company Man.
- Act as the safety leader for the crew.
- Oversee the maintenance of the rig equipment.
- Responsible for training the crew on proper safety, operational procedures and cross training to cover each other.
- Responsible for operating forklifts, heavy equipment and auxiliary equipment.
- Must be able to travel extensively to other locations, including rural areas, other states and internationally, to work where the rig is operating.
- Must be able to work weekends and holidays when necessary.
- Must be able to work overtime when necessary.
Requirements
- The ability to understand procedures and instructions to the areas of assignment as would be acquired in four years of high school.
- Must have 2 years of experience in the mechanical operations and procedures of a drilling and/or work over rig.
- Must know and understand drilling fundamentals.
- Must possess excellent team leadership, communication skills and supervisory experience.
- The ability to complete tasks efficiently and effectively.
- The ability to think quickly and respond to changing situations.
- Must be able to communicate in English with other employees and read and write at a level that will enable to perform the work in a safe and efficient manner.
- Must be able to communicate verbally and visually in a clear and effective manner including in noisy and low illumination environments.
- Must be able to safely operate a forklift, heavy equipment and auxiliary equipment.
- Must be able to operate a vehicle in a safe manner.
- Must possess at any time a valid driver's license with a driving record acceptable to ORMAT's auto insurance carrier.
Physical Requirements
- This job requires sitting approximately 30% and standing up to 70%.
- The ability to lift 50 lbs. repeatedly.
- Must be able to wear any required protective equipment, as required by safety procedures and regulations.
- Must be able to frequently climb to and work off of elevated platforms, ladders and walkways.
- This job requires standing for long periods of time with moderate bending, stooping, and kneeling.
Apply now
Job expired?Please let Ormat Technologies know you found this job on Rejobs. This will help us grow and get more people to work on renewable energy!
Apply now
Job expired?Please let Ormat Technologies know you found this job on Rejobs. This will help us grow and get more people to work on renewable energy!
Discover how you’re connected
View connectionsSee your contacts at Ormat Technologies on LinkedIn to leverage your network in applying for this position.
Get job alerts
Get job alerts for opportunities in Reno, Nevada, United States
Join Talent Pool
Let top clean energy employers find you
About the role
March 7, 2026
Full time
Company
- Reno, Nevada, United States
2 years of experience in mechanical operations and procedures of a drilling and/or work over rig
UTC-08:00