Rejobs
Arcosa Wind Towers
Arcosa Wind Towers
34 open jobs · Posted 142 days ago

Control/Process Operator (+ $1.50/hr Night Shift Premium)

Join Arcosa Wind Towers in Tulsa, Oklahoma as a Control/Process Operator. This role involves rolling and inspecting plates, operating burn tables and lifts, and ensuring safety compliance. Enjoy a $1.50/hr night shift premium and be part of a team focused on renewable wind energy production.

Salary
Not stated
Location
Tulsa, OK
Workplace
On-site
Job type
Full time
Applies on recruiting2.ultipro.com

Check your inbox.

On a phone? Apply from a computer later.

Arcosa Wind Towers is seeking a CPO in Tulsa, OK. In this role, you will roll and re-roll plate.

Safety Sensitive: Yes

What you will do

  • Roll and re-roll plate to match sweep
  • Inspect plate for defects and damage
  • Operate burn table to cut plate according to blueprints and measurements and dispose of any remaining material
  • Operate mag lift to transfer plate within the department
  • Blast and paint plate
  • Follow all safety rules and practices
  • May be involved in safety committees or initiatives
  • Perform other duties as assigned

Preferred Qualifications

What you will need

  • A minimum of 1 year of experience
  • The ability to operate a lift to move loads up to 30,000 pounds
  • The ability to operate an overhead crane on a production line
  • The ability to read a tape measurer
  • The ability to read, write, and speak English fluently
  • Ability to work as a team, demonstrate high ethical standards, treat all coworkers with dignity and respect and support a positive working culture

Physical Requirements

  • Stand and walk for extended periods of time
  • Use hands and arms to feel, reach and grasp
  • Ability to stoop, kneel, crouch or crawl
  • Lift and/or move up to 50 pounds

Working Conditions

  • Mon-Fri 4:30PM-3:00AM (Subject to change based on business needs), *Mandatory overtime occasional scheduled including weekends
  • Work environment includes plant, warehouse, production and non-production areas and plant grounds which operate multiple shifts and frequent weekend shifts
  • Ability to tolerate both high and low temperatures, loud noises typical of a manufacturing plant

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Typical pay for similar roles

Estimate
US$46,800–76,470 annually
Entry level · Manufacturing & Production · United States · 110 similar jobs

The middle half of pay advertised on Rejobs for this group over the last 24 months. This employer has not stated a salary.

About this role

Posted
1 Jul 2026
Sectors
Timezone
UTC-05:00
Experience
Minimum of 1 year

About Arcosa Wind Towers

Company overview

Arcosa Wind Towers, Inc., a subsidiary of Arcosa, Inc., which has been wholly owned by CRH since October 2026

Dallas, United States

2000

Wind tower revenue of USD 355.2 million in 2025

What they do

Arcosa Wind Towers, formerly Trinity Structural Towers, Inc., is a leading manufacturer of structural wind towers in North America. It can build towers to turbine manufacturers’ designs or work with customers on towers that meet the criteria of a specific turbine and project site. It also coats steel structures, with NACE Level 3 coatings experts on staff, and makes fabricated steel internal components in its own manufacturing facility.

The business belongs to Arcosa’s Engineered Structures segment, which also makes utility, traffic and lighting, and telecommunication structures. Its primary customers are wind turbine producers, and it competes with domestic and foreign tower makers; GE Vernova alone accounted for about 12.2% of Arcosa’s consolidated revenues in 2025. Arcosa runs three wind tower plants in wind-rich regions of North America, and was spun off from Trinity Industries in 2018.

Arcosa Wind Towers has implemented lean manufacturing across all of its facilities, where continuous improvement teams are active, and it is ISO 9001:2015 certified.

Projects and track record

Arcosa Wind Towers has delivered more than 12,000 towers since 2000 for wind farms across the United States. In 2016 its former parent, Trinity Industries, received a USD 940 million order for wind towers, to be delivered over three years from 2017.

In March 2023 Arcosa announced wind tower orders of about USD 750 million for delivery from 2024 through 2028, most of them for wind projects in the Southwest, together with plans for a plant in Belen, New Mexico, to supply them. The orders Arcosa received shortly after the Inflation Reduction Act passed came to USD 1.1 billion for delivery from 2023 through 2028. The New Mexico plant began delivering towers late in the second quarter of 2024, and by the end of 2025 roughly half of those orders had been delivered.

Recent developments

Wind tower revenue rose 27.2% in 2025, with increased production at the recently opened New Mexico plant. In the second half of 2025 Arcosa received USD 247 million of wind tower orders and moved some deliveries from 2028 into 2026, giving all three active plants backlog visibility for 2026. Arcosa recognised USD 72.8 million in gross AMP tax credits for wind towers produced and sold in 2025, and the One Big Beautiful Bill Act ends those credits for towers sold after 2027.

Arcosa expected lower wind tower volume and profitability in 2026, with a recovery in 2027. Wind tower revenue fell 20.2% to USD 141.1 million in the first half of 2026, and the backlog stood at USD 537.4 million at the end of June 2026, with 28% due to be recognised in 2026 and 66% in 2027. As demand for utility structures grew, Arcosa converted an idled wind tower plant to utility structures, which began delivering utility poles in the second quarter of 2026, and it planned to convert one of its existing wind tower plants in 2027.

CRH completed its acquisition of Arcosa on 23 October 2026, at USD 150 per share in cash, after announcing on 22 June 2026 an agreement to buy it for a total enterprise value of about USD 8.5 billion.

Working there

Arcosa Wind Towers advertised jobs in November 2026 at its plants in Newton, Iowa, including a production manager; Tulsa, Oklahoma, including day-shift quality inspectors; and Belen, New Mexico, including a bilingual human resources generalist. The Newton plant began operations in 2008 and is one of its largest capacity plants, and the Tulsa plant began operations in 2013. A welder/fitter job in Tulsa was advertised for both Arcosa Wind Towers and Meyer Utility Structures, another Arcosa subsidiary.

A Tulsa job ad lists health, dental and vision cover and a 401(k) with company match among its benefits, along with critical illness cover, flexible spending accounts, company-paid life and AD&D insurance, short-term disability and an employee assistance programme. Arcosa’s careers site adds that benefits, depending on eligibility, may include tuition reimbursement and leadership development programmes, as well as paid holidays, paid vacation and sick pay.

More wind jobs like this

Control/Process Operator (+ $1.50/hr Night Shift Premium)
Arcosa Wind Towers