Job description
A Maintenance Technician III is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 6 or more years of maintenance experience in a manufacturing environment or 4 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
- Maintain compliance with all Company policies.
- Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
- Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
- Be an effective team player and work well with all other departments.
- Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
- Make recommendations for preventative/predictive maintenance tasks to improve efficiency, equipment availability, and performance.
- Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
- Repair and replace electrical, hydraulic, pneumatics, and electronic components such as motors, contractors, relays, timers, types of switches, PLCs, light curtains, motor controls, and valves as directed by Team Lead or Supervisor.
- Diagnose faults on electrical equipment or systems, which may involve complex interlocking, interrelated circuits, integrated systems, and complex sequencing.
- Diagnose complex electrical systems, mechanical components, pneumatic components, and controls to identify hazards, defects and need for adjustments, repairs, or programming.
- Examine, install, replace, and repair electronic wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures, and other electrical components.
- Support and perform installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
- Test electrical and electronic equipment and components for continuity, current, voltage, and resistance.
- Run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and Company policy.
- Wire new control panels according to supplied drawings and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
- Make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
- Support the maintenance of spare parts inventory levels.
- Maintain an organized workplace that complies with housekeeping requirements.
- Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
- Must be able to lift loads upwards of 50lbs.
Qualifications
Skills
- Excellent interpersonal, organizational, and communication skills.
- Proficiency in Microsoft Office for daily tasks.
- Strong attention to detail and ability to follow instructions and multi-task as needed.
- Knowledge of equipment set up, functions, operating procedures, and preventative maintenance techniques.
- Ability to operate hand tools and machinery such as a lathe and mill.
- Strong diagnostic, analytical, and problem-solving skills.
- Troubleshooting experience with electrical & mechanical equipment, PLC systems, Robots, AC & DC drives, servo drives, motion control, HMI interface, motor controls, safety sensors, and relays.
- Ability to read wiring diagrams, electrical, mechanical, pneumatic, and hydraulic schematics, and ladder/function block logic.
- Knowledge of Computerized Maintenance Management Systems (CMMS) preferred.
- Knowledge of facility equipment (HVAC, Air Compressor, Air Dryer, etc.) preferred.
- Basic knowledge of single and 3-Phase electrical systems preferred.
Traits
- Ability to work effectively with cross-functional team members.
- Mechanical aptitude/interest.
Education and/or Experience
- 6 years or more of maintenance experience, or 4 years of experience with one of the following:
- 309A - Electrician - Construction & Maintenance
- 433A - Industrial Mechanic
Preferred:
- Deep knowledge of electrical and hydraulic systems.
- Comprehensive command of maintenance procedures and techniques.
- Forklift and/or scissor lift certification or experience.
Physical Requirements
- Must be able to lift and move materials up to 25 pounds independently and participate in team lifts of approximately 60 pounds as required for essential production tasks.
- Must be able to remain in a stationary position or move throughout the production floor for extended periods (for the duration of the shift up to 8+ hours per shift).
- Must be able to operate, position, adjust, or move equipment, tools, or materials necessary for production processes.
- Capable of performing consistent, manual production tasks over long shifts.
- Must be able to work in typical manufacturing environmental conditions, including areas requiring PPE, exposure to noise, and temperature variation.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Additional Information
Compensation and Benefits
- $28-$40/Hour
- Paid Time Off (vacation, sick, and holiday)
- 401(k) Retirement Plan
- Medical/Dental/Vision Insurance Plans
- Health Savings Account option
- Supplemental/Voluntary Insurance Plans
- Employee Assistance Program
- Tuition Reimbursement Program
- Employee Recognition Programs
- Employee PV Panel Purchase Program
Silfab Solar is an Equal Opportunity Employer and is committed to fostering an inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.
Any information provided during the application process will be maintained in accordance with applicable privacy laws and Equal Employment Opportunity (EEO) requirements.
Pay & benefits
About this role
About Silfab Solar
Company overview
Silfab Solar Inc., backed by funds advised by ARC Financial Corp.
Mississauga, Canada
2010
About 800 employees (2023)
What they do
Silfab Solar designs, develops and manufactures PV modules and cells. Its panel range includes Silfab Elite, Silfab Prime, Silfab Commercial and Silfab Utility, sold through distributors and installers across the United States and Canada.
The company operates a 1.1 GW PV module factory in Burlington, Washington. Its plant in Fort Mill, South Carolina, was set to produce at least 1 GW of solar cells and 1.3 GW of modules at first.
Projects and track record
Silfab Ontario opened a solar module factory in Mississauga in 2011, and production has since shifted from Ontario to Burlington, Washington. In 2025, the independent testing authority Kiwa PVEL named its Silfab Commercial series a Top Performer, the seventh year it has recognised Silfab.
The LSE Ursa Minor community solar project in Concord, New Hampshire, completed in November 2026, was built with Silfab panels and is expected to generate more than 9 GWh a year. In spring 2026, Ecotech Solar installed Silfab Prime modules on 24 homes of the Suquamish Tribe in Washington State, with 212 kW of solar generation in total.
Recent developments
In November 2024, Silfab closed USD 100 million of new financing to scale its solar cell plant in Fort Mill, including a USD 50 million equity investment led by funds advised by ARC Financial Corp. In May 2025, it announced the sale of up to USD 110 million of Section 45X tax credits for advanced manufacturing and acquired EnPV’s technology patent portfolio, adding Self-Aligned Back Contact (SABC) technology for back-contact solar cells.
Working there
Silfab’s openings include production, stringer and maintenance roles on Pitman day and night shifts in Burlington, Washington, and facilities, quality and marketing jobs in Fort Mill, South Carolina. It offers competitive pay, comprehensive benefits, tuition reimbursement and an employee purchase programme.
Its internships, offered at all Silfab facilities, last 10 to 12 weeks, or 3 to 6 months for co-op students, in fields such as solar panel manufacturing, engineering, environmental sciences, and sales and marketing.