Rejobs
IMO
IMO
19 open jobs · Posted today

CNC Lathe Operator

Join IMO as a CNC Lathe Operator in Gremsdorf, Germany. Operate CNC lathes, set up fixtures, inspect components and maintain equipment. Bring metalworking training and production experience. Enjoy 30 days’ annual leave, pension provision and further training.

Salary
Not stated
Location
Gremsdorf, Germany
Workplace
On-site
Job type
Full time
Applies on jobs.imo.de

Check your inbox.

On a phone? Apply from a computer later.

Job description

Interesse an unserer Erfolgsgeschichte mitzuschreiben?

Ihre Aufgaben

  • Bedienung von CNC-Drehmaschinen
  • Montage und Ausrichtung der Vorrichtungen und Spannmittel
  • Durchführung von Sicht-, Maß- und Lagekontrollen
  • Anpassung der Maschinen und Anlagen an die Produktionsbedingungen
  • Durchführung von Wartungsarbeiten
  • Reinigung und Pflege der Maschinen und Anlagen

Ihr Profil

  • Abgeschlossene Berufsausbildung in der Fachrichtung Metall,
  • z. B. Maschinen- und Anlagenführer m/w/d oder vergleichbare Ausbildung
  • Berufserfahrung in der Bedienung von Produktionsanlagen
  • Kenntnisse in der CNC-Programmierung sowie im Lesen von technischen Zeichnungen
  • Routinierter Umgang mit Messmitteln
  • Sichere Deutschkenntnisse in Wort und Schrift
  • Bereitschaft zur Schichtarbeit

Wir bieten

  • Flache Hierarchien und Einbindung in Entscheidungsprozesse
  • 30 Tage Urlaub im Jahr und Sonderurlaubstage
  • Betriebliche Altersvorsorge und weitere Sozialleistungen
  • Entwicklungsmöglichkeiten mit Weiterbildungsangeboten
  • Gute Verkehrsanbindung und Parkmöglichkeiten

Überzeugt?

Dann freuen wir uns auf Ihre Bewerbung über unser Bewerbungsportal.

IMO Holding GmbH | Imostraße 1 | 91350 Gremsdorf

Frau Kelmendi | Tel. 09193 6395-1460

Pay & benefits

Retirement plan Paid time off Learning budget

Typical pay for similar roles

Estimate
€43,200–77,450 annually
Mid level · Germany · 117 similar jobs

The middle half of pay advertised on Rejobs for this group over the last 24 months. This employer has not stated a salary.

About this role

Posted
18 Nov 2026
Sectors
Timezone
UTC+01:00
Experience
Abgeschlossene Berufsausbildung im Metallbereich und Berufserfahrung in der Bedienung von Produktionsanlagen.
Employer imo.de LinkedIn IMO

About IMO

Company overview

IMO Holding GmbH (IMO Unternehmensgruppe), an owner-managed company

Gremsdorf, Germany

1988

around 400 employees at its sites in Gremsdorf, the USA and China

What they do

IMO has developed and manufactured slewing rings and slew drives since 1988, producing exclusively in Gremsdorf in the Nuremberg metropolitan region. There it makes ball, roller and combined slewing rings in standard versions from 100 to 6,000 mm. IMO developed and patented its first slew drives as early as 1993; these ready-to-install units with spur gear or worm drive now come in a wide range of standard series.

In wind energy, IMO has made and sold blade, yaw and generator bearings for more than 30 years for onshore and offshore turbines, for turbine sizes from 5 kW to 14+ MW and bearing diameters from 200 to 6,000 mm. For low-wind turbines and large offshore turbines with and without individual pitch control, IMO developed the T-Solid 4IPC roller blade bearing. The T-Solid pitch bearing is often the replacement when 4-point blade bearings fail prematurely in the field.

IMO also builds worm and spur gear slew drives for solar trackers as well as triple-row roller slewing rings used as blade bearings in tidal power plants. For yaw and blade bearings that fail prematurely, the company supplies replacement solutions for wind turbines from a wide range of manufacturers.

Outside renewable energy, IMO lists applications including cranes, steering gears for self-propelled modular transporters (SPMT), marine cranes and medical technology, as well as open-pit and underground mining, transport technology and defence technology.

Projects and track record

In total, IMO has supplied more than 90,000 slewing rings to the wind energy sector, installed worldwide in around 45 GW of capacity. In 2015, three IMO blade bearings, each about 4.5 m in diameter, pitched the rotor blades of a floating 7 MW offshore turbine at a large wind farm test site off Fukushima in Japan.

In research, IMO works with Fraunhofer IWES and the Institute of Machine Design and Tribology (IMKT) at Leibniz University Hannover. In the joint HAPT project (Highly Accelerated Pitch Bearing Test), the project team is laying the groundwork for further development of blade bearings for wind power; the German Federal Ministry for Economic Affairs and Energy funded HAPT with EUR 10.7 million. In 2019 the first 5 m IMO blade bearings were tested on the Large Bearing Laboratory test rig of Fraunhofer IWES in Hamburg; IMO was the exclusive industry partner in this accelerated life testing of pitch bearings up to 10 MW.

In 2011 IMO was granted its 100th international patent, for the T-Solid blade bearing. IMO is a member of the German Wind Energy Association (Bundesverband WindEnergie) and of the Forschungsvereinigung Antriebstechnik.

Working there

For graduates, IMO offers roles in development, design engineering, accounting, export, purchasing and sales. The job advert for development engineers lists flexitime and mobile working, 30 days of holiday a year plus special leave days, and a company pension scheme. IMO accepts applications only through its online application portal, including for apprenticeships.

In November 2026 IMO was recruiting, among others, a buyer, an electrician or mechatronics technician for machine maintenance and a development engineer. Apprenticeships starting on 1 September 2027 are advertised for roles including industrial mechanic, machine and plant operator and mechatronics technician. In the combined study programme (Verbundstudium), trainees earn an IHK qualification, for example as a technical product designer, and a Bachelor of Engineering in mechanical engineering in 4.5 years at the Technische Hochschule Nürnberg Georg Simon Ohm.

More wind jobs like this

CNC Lathe Operator
IMO