Operations and Maintenance Engineer
Ormat Technologies
Company Overview
Ormat Technologies Inc.
Reno, NV, United States
1965
Approximately 2,000-5,000 employees globally (source: salestools.io). Revenue exceeding $1 billion annually (source: salestools.io).
What They Do
Ormat Technologies focuses primarily on geothermal power generation, utilizing proprietary binary cycle technology through the Ormat Energy Converter (OEC). This innovative system operates on a closed-loop mechanism where geothermal brine heats a secondary fluid with a low boiling point, enabling turbines to generate power without emissions. This technology allows Ormat to harness lower-temperature geothermal resources, ranging from 150°F to 300°F, making it a leader in the geothermal sector with over 3,200MW of geothermal and recovered energy generation (REG) equipment supplied globally since the 1980s. The company holds a commanding market share of over 70% in binary geothermal technology, supported by more than 100 patents (source: ormat.com, wikipedia.org).
Projects & Track Record
Ormat has developed over 190 power plants with a total installed capacity of 3,200MW, showcasing its extensive experience in the geothermal sector. Notable projects include the 36MW Heber Complex in California, the 150MW Olkaria III in Kenya, and the 50MW Leyte Optimization in the Philippines. The company has also made significant strides in the U.S. market, achieving a capacity of 1,300MW by 2010 through a combination of development, construction, and acquisitions. Recent completions include the Rabbit Hill Battery Energy Storage System in Texas, marking Ormat's first project in the state, and the acquisition of the Pomona Energy Storage Facility in California, which represents its first foray into energy storage in that region (source: ormat.com, wikipedia.org).
Recent Developments
In the past two years, Ormat has made significant advancements, including the announcement of a Plain Bearings Turbine innovation on September 11, 2024, which aims to enhance geothermal efficiency. The company also partnered with SLB on June 24, 2024, to deliver integrated geothermal project solutions, further solidifying its position in the market. Additionally, Ormat celebrated key milestones in energy storage on April 18, 2024, including the Wrise Event for Women in Renewable Energy in Nevada and the Cove Fort tour, which highlighted permitting reforms. While no major acquisitions or mergers have been reported since 2021, Ormat is actively targeting to double its energy storage capacity to 600-670MW/1.5-1.7GWh by the end of 2025, supported by U.S. Investment Tax Credit (ITC) incentives (source: ormat.com, investmentreports.co).
Working There
Ormat Technologies offers a diverse range of roles across various departments, including engineering (software, infrastructure, geothermal turbines), product management and design, sales and marketing, operations, finance, HR, and executive positions. The company actively hires at its Reno headquarters, as well as in Sparks, NV, and globally in locations such as Indonesia and Kenya. The company culture emphasizes innovation, collaboration, and continuous learning, with a focus on employee well-being. The Reno headquarters features modern amenities such as open-plan offices, collaboration spaces, high-speed technology infrastructure, fitness and wellness rooms, cafeterias, and lounges, all designed to foster both focused work and teamwork (source: salestools.io).
Contact
Last updated on 2026-02-13 | Report an issue
Headquartered in Reno, NV, Ormat designs, develops, builds, owns and operates geothermal and recovered energy-based power plants in the US and worldwide. With a spotless international reputation, we're on track to become a leading global provider of renewable energy.
We take pride in our family-oriented business building practical green energy solutions from the ground up.
Join a team that's giving new life to the future of our planet.
Overview
Position is located onsite in Brawley, CA, applicants must live within 30 minutes of site or willing to relocate.
This position is responsible for general engineering support including development of plant operation and maintenance procedures, ongoing plant troubleshooting, develop and participate in plant schedule and preventive maintenance, plant safety, plant inventory, plant efficiency, performance monitoring and improvements, development and implementation of various field projects, revenue improvement and cost reduction.
Responsibilities
- Thorough understanding of battery operation to include start-up, shutdown and emergency operational actions.
- Performs both routine and non-routine preventative and corrective maintenance on plant equipment.
- Makes plant rounds, logs equipment operating parameters and adjusts equipment as required.
- Coordinates support contractors and internal resources.
- Requisitions and assists in ordering and receiving plant materials.
- Represents the Company with vendors and regulators as assigned.
- Continuously increases own knowledge by personal independent study.
- Implements emergency procedures as assigned.
- Implements safety procedures as assigned.
- Basic knowledge and experience in PLC programming, SCADA programming and implementation.
- Works with contractors and other temporary labor during on site activities.
- Uses installed and portable test equipment, technical manuals, system drawings and electrical schematics to troubleshoot equipment and systems.
- Programs and troubleshoots field equipment.
- Must be able to operate a vehicle in a safe manner, enter and exit vehicle without assistance, remain alert while driving for continuous period of time and read and understand maps.
- Must be able to travel overnight approximately 25% of the time out of the office by air, train or auto.
Requirements
- A High school diploma with at least two (2) years of technical training in operations and routine maintenance of battery storage, power plants and four years of experience working in a power plant or an equivalent environment.
- Thorough knowledge of operating a power plant or battery storage facility.
- Thorough knowledge and/or background for operating and maintaining mechanical and/or electrical systems. Ability to maintain electrical systems is preferred.
- Familiarity with basic internetworking protocol and related remote communication constructs for telemetry with RTUs.
- Knowledge and understanding of PLC based instrumentation and control systems. Ability to troubleshoot, repair and calibrate is preferred.
- Preferred working knowledge of power electronics within a utility (or similar) operating environment.
- Preferred knowledge of utility industry measurement & verification standards.
- Ability to understand engineering design drawings, vendor equipment drawings and technical information.
- Proficient in the use of hand tools, power tools and test equipment normally used in a power plant environment.
- Thorough knowledge of plant hazards and safety requirements.
- Thorough knowledge of computer based preventive maintenance programs.
- Computer literate in the use of Microsoft Word, Excel and various other programs.
- Effective written and verbal communication skills.
- Must possess a valid state driver's license.
- Ability to make effective long-term and instantaneous decisions.
- Ability to solve problems.
- Attention to detail.
- Use discretion to balance competing priorities.
- Familiarity with standard power plant PPE and its proper use.
- Available for off shift call in.
- Will often work independently and be the only company person on site.
- May be called upon to travel to other company sites.
Physical Requirements
- Occasionally perform heavy lifting up to 75 pounds.
- Must be able to frequently climb to and work off elevated platforms, ladders and walkways.
- Must be able to work in confined spaces and in harsh weather conditions.
- Must be able to wear a variety of protective equipment.
- Jobsite duties require sitting and/or standing for long periods of time with moderate bending, stooping, and kneeling.
- The ability to work at a computer and computer monitor for long periods of time and stay alert.
Apply now
Job expired?Please let Ormat Technologies know you found this job on Rejobs. This will help us grow and get more people to work on renewable energy!
Discover how you’re connected
View connectionsSee your contacts at Ormat Technologies on LinkedIn to leverage your network in applying for this position.
About the role
February 12, 2026
Full Time
Company
February 21, 2026
On-site
- Brawley, California, United States
2 years of technical training and 4 years of experience in a power plant or equivalent environment
UTC-08:00
Tags
Get Job Alerts
Get alerts for Geothermal Energy jobs in Brawley, California, United States
Join Talent Pool
Let top clean energy employers find you