Description de poste
Join our dynamic teams designing and developing next-gen energy technologies and help drive a sustainable future!
The Enphase Power Systems Innovation team in the office of the CTO is seeking a Mechanical Technician Temp for 2 months to support hands-on build-up, assembly, and integration of prototype solid-state transformer (SST) racks, skids, and enclosures. This is a full-time, 2 month temp position requiring on-site presence every day at our Austin, TX facility. Candidates must be local to the Austin metro area.
What You Will Do
- Rack and cabinet build-up-assemble electrical components, power supplies, contactors, breakers, fuses, terminal blocks, DIN rail hardware, and control devices onto 19-inch racks, NEMA cabinets, and prototype skids per engineering drawings and layouts
- Point-to-point wiring-route, terminate, label, and verify power and signal wiring per wiring diagrams, schematics, and wire lists; perform point-to-point continuity checks and ring-out before power-on
- Connector and terminal termination-crimp, solder, and terminate connectors including ring terminals, ferrules, Deutsch connectors, Anderson connectors, and multi-pin control connectors per manufacturer specifications
- Cable harness fabrication-build cable harnesses from cut sheets and harness drawings, including wire cutting, stripping, crimping, labeling, lacing, and strain relief installation
- Power distribution assembly-install and wire busbars, fuse holders, disconnect switches, power distribution blocks, and grounding systems per single-line diagrams and electrical schematics
- Instrumentation and sensor installation-mount and wire voltage transducers, current transformers (CTs), thermocouples, RTDs, pressure sensors, and other measurement devices
- Testing support-assist engineers with Hi-Pot, insulation resistance (Megger), functional checkout, and power-on commissioning of assembled systems; record test data and flag anomalies
- Labeling and documentation-apply wire labels, terminal markers, and component ID tags per labeling standards; maintain as-built redline drawings and build logs
- Safety and housekeeping-follow lockout/tagout (LOTO) procedures, maintain a clean and organized work area, and adhere to all EHS requirements for work on energized and de-energized electrical equipment
Who You Are and What You Bring
- Fundamental electrical knowledge - solid understanding of AC/DC circuits, Ohm's law, series/parallel circuits, grounding, and electrical safety practices
- Education: Associate's degree or technical certificate in Electrical Technology, Electronics, or related field; or equivalent military/trade training
- Experience: 2+ years of hands-on electrical assembly, wiring, or technician experience in a lab, manufacturing, or prototype environment
- Local to Austin, TX - must be able to report on-site daily for the full 3-month contract duration; this is not a remote or hybrid position
Minimum Skills, Knowledge, and Special Attributes
- Wiring and termination proficiency-demonstrated ability to read electrical schematics and wiring diagrams and translate them into correctly wired assemblies
- Hand tool and power tool proficiency-skilled with crimpers, wire strippers, torque wrenches, drill presses, band saws, and bench grinders
- Test equipment familiarity-comfortable using digital multimeters, Megger/insulation testers, clamp meters, and oscilloscopes at a basic level
- Mechanical aptitude-ability to drill, tap, mount components, and perform basic mechanical assembly tasks alongside electrical work
- Attention to detail-meticulous approach to wire routing, labeling, torque specs, and workmanship quality
- Self-starter with strong work ethic-ability to work independently once given clear direction, and proactively flag issues to the engineering team
Additional Desired Skills
- Medium- or high-voltage experience-hands-on work with systems above 480 VAC or 800 VDC
- IPC/WHMA-A-620 workmanship awareness-familiarity with cable and wire harness workmanship standards
- Power electronics exposure-prior experience in a power electronics, inverter, or energy storage lab environment
- PLC and controls wiring-experience wiring PLC I/O modules, relay logic panels, and industrial control systems
Physical Requirements & Working Conditions
- Ability to regularly lift, carry, push, and pull materials, components, and equipment weighing up to 50 pounds with assistance from another person or with appropriate material-handling equipment
- Ability to safely move and position large mechanical assemblies, racks, panels, transformers, heatsinks, and other prototype hardware
- Frequent standing, walking, bending, stooping, kneeling, crouching, reaching, and working in tight or confined spaces during assembly and integration activities
- Ability to use hand tools, power tools, measuring instruments, and shop equipment for extended periods of time
- Ability to climb ladders and work from step stools or elevated platforms as needed
- Ability to work in a laboratory, prototype, and light industrial environment with exposure to noise, dust, and varying temperatures
- Ability to wear required personal protective equipment (PPE), including safety glasses, gloves, hearing protection, and safety-toed footwear
- Ability to distinguish colors, read labels, assembly drawings, and technical documentation, and identify mechanical and electrical components
- Ability to operate or assist with material-handling equipment such as pallet jacks, hand trucks, chain hoists, and other lifting devices
- Ability to remain physically active throughout the workday and perform hands-on assembly, fabrication, and material-handling tasks on a daily basis
Thehourly range for this position is $30-40/hr.
Salaire et avantages
À propos de ce poste
À propos de Enphase
Présentation de l’entreprise
Enphase Energy, Inc., cotée au NASDAQ (ENPH) depuis 2012
Fremont, Californie, États-Unis
2006
Environ 2 600 salariés et collaborateurs (2026) ; chiffre d’affaires net de 1,47 milliard de dollars en 2025
Activités
Enphase conçoit, développe, fabrique et vend des solutions énergétiques pour les logements qui gèrent la production, le stockage, le pilotage et la communication de l’énergie sur une seule plateforme. L’entreprise a été pionnière du micro-onduleur à semi-conducteurs, qui convertit l’énergie au niveau de chaque module solaire. Son Enphase Energy System gère les micro-onduleurs IQ, les batteries IQ, les IQ Load Controllers et l’IQ EV Charger sur une plateforme technologique unique.
Enphase vend principalement à des distributeurs solaires, qui revendent ses produits aux installateurs, et directement à certains grands installateurs, fabricants d’équipement d’origine (OEM) et partenaires stratégiques. L’Europe a représenté environ 14 % de son chiffre d’affaires net en 2025, contre environ 23 % en 2024.
Projets et références
En octobre 2026, Enphase avait expédié environ 90,8 millions de micro-onduleurs, et plus de 5,3 millions de systèmes Enphase étaient déployés dans plus de 165 pays. Plus de 26 000 installateurs dans le monde sont certifiés pour installer ses batteries IQ.
En 2025, Enphase a vendu environ 6,4 millions de micro-onduleurs et expédié 706,1 MWh de batteries IQ. En décembre 2025, elle a commencé à livrer l’IQ9N-3P Commercial Microinverter, le premier micro-onduleur doté de la technologie au nitrure de gallium et conçu pour les réseaux triphasés 480Y/277 V sans transformateur externe.
Actualités récentes
En novembre 2025, Enphase a lancé sa propre production dans l’usine d’Arlington, au Texas, auparavant exploitée par Salcomp Manufacturing USA Corp. En janvier 2026, elle a annoncé une restructuration touchant environ 160 salariés, moins de 6 % de ses effectifs, afin de supprimer des postes et de transférer certaines fonctions vers des régions aux coûts plus bas.
Selon Enphase, le solaire résidentiel aux États-Unis, son marché principal, fait face à des vents contraires liés à la hausse des taux d’intérêt et à la fin du crédit d’impôt fédéral de la Section 25D. En août 2026, elle a ouvert aux États-Unis les précommandes de l’IQ Battery C80, son premier système de stockage par batterie destiné aux professionnels.
En avril 2026, Enphase a présenté l’IQ Solid-State Transformer (IQ SST) pour les centres de données d’IA, un système modulaire de 1,25 MW composé de 342 modules de puissance remplaçables à chaud, conçu pour fournir du courant continu de 800 V directement à la dernière architecture de calcul de NVIDIA. En octobre 2026, elle a démontré la conversion de 13,8 kV en courant alternatif en 800 V en courant continu avec l’IQ SST dans son laboratoire de R&D d’Austin, au Texas, et prévoit des pilotes clients en 2027 et des livraisons commerciales à partir de 2028.
Travailler dans l’entreprise
Fin 2025, 1 743 salariés à temps plein d’Enphase travaillaient en Inde, 717 aux États-Unis, 202 en Europe et 133 en Nouvelle-Zélande. Enphase dispose de bureaux administratifs et de sites de R&D à Petaluma et à Austin, aux États-Unis, d’un site de R&D à Christchurch, en Nouvelle-Zélande, d’un bureau de support mondial à Bengaluru, en Inde, et d’un site de marketing, de support commercial et de R&D à Eschborn, en Allemagne. Dans certains pays et sites, les salariés peuvent travailler à distance ou en mode hybride selon les besoins de l’activité.
Son site carrières présente des familles de métiers dans la vente, le support technique et le service terrain, ainsi qu’en ingénierie firmware, matériel et logiciel. Son programme universitaire recrute de jeunes diplômés, encadrés par des experts du secteur. Tous les salariés reçoivent des unités d’actions restreintes (RSU), et les avantages comprennent un plan d’achat d’actions pour les salariés, des primes ou commissions trimestrielles et une assurance santé subventionnée.